Idiomas disponibles
Idiomas disponibles
Use
Features
Turning on or off/Adjusting wind speeds
Power on
Press the
button to start the fan.When it is turned on for the first time,
the wind speed will be set at Level 1.When it is turned on again after being
turned off, the wind speed will default to the level set when last powered on.
Power off
Press and hold the
button for 2 seconds to stop the fan.
Setting oscillation
Press the
button to set fan oscillation.When the fan is turned off, it will
automatically return to the home position.
Screen display
Wi-Fi status indicator
Ionizer status indicator
The ionizer function can be enabled/disabled via the app. When
the fan is turned on for the first time, the function will be enabled
by default.
Wind speed status indicators
The wind speed can be switched between level 1, 2, 3, and 4. The
corresponding status indicators will illuminate accordingly (refer
to the table below).
Wind
speed
Status
indicators
Natural breeze status indicator
The natural breeze function can be enabled or disabled via the
app or remote control.
Pairing remote control via Bluetooth
1. Press and hold the
and
speed indicators will begin to flash simultaneously, and will go out once pairing is
successful.
2. When a pairing request is received by the fan, the 4 LEDs on the fan body will begin
to flash. At this point, press any button on the fan to pair. A beep indicates that pairing
has been successful.
3. If no button is pressed on the fan within 30 seconds, pairing will discontinue and the
remote control will stop flashing.
9
Power
Level 1
Level 2
Level 3
off
Indicator on
buttons simultaneously for 5 seconds. The 4 wind
Level 4
Indicator off
