Idiomas disponibles
Idiomas disponibles
AUTO
In AUTO EDID mode, the properties of the two displays are compared. The best possible format
that both displays support is then delivered. In this mode, the weaker display is taken into ac-
count. Both displays show a picture, but the better display may not show the best possible picture.
Example: When connected to a 4K TV and a Full HD projector, in AUTO the sources deliver a Full HD
video signal. If both displays support 4K, it will be 4K video.
COPY
In COPY-EDID mode, the sources deliver a signal optimised for display A. If Display B is weaker and
supports fewer formats, it may not show a picture. If necessary, you can reduce the video format
on the player.
Example 1: If a 4K TV is connected to output A and a Full HD projector is connected to output B, a
4K input player delivers a 4K picture signal. The Full-HD projector therefore shows no signal, be-
cause it cannot process 4K. Solution: If necessary, reduce the output on the player to Full HD.
Example 2: If a 4K TV with Dolby Vision is connected to output A and a 4K projector (without Dolby
Vision) is connected to output B, a 4K input player delivers a 4K picture signal with Dolby Vision.
The video projector then displays the colours incorrectly for Dolby Vision content. Solution: Instead
of Dolby Vision, set HDR10 on the source.
STD
In STD EDID mode, the HDMI switch generates an EDID information, which signals the support of
4K 60Hz HDR10 to the input players.
Example: No matter what the actual resolutions of the displays really are, 4K can be played (but
perhaps not displayed). You can set the video properties on the players as desired.
Output A with ARC/eARC support
This output supports the audio return channel of a TV. This means that the sound from the internal
TV receiver or TV apps can be played back via the Soundbar. To play the TV sound, please select
input 1 on the HDMI switch via the remote control or button.
Installation and operation
• Connect the HDMI-eARC connector of your Soundbar to HDMI Input 1. Connect 1–3 HDMI
signal sources (e.g. Blu-ray player) to HDMI Inputs 2–4.
• Connect HDMI output A to the HDMI-ARC or HDMI-eARC connection of your TV. If no TV is to
be connected, connect to the HDMI input of your monitor or video projector.
• Connect the HDMI output B to an HDMI input of your second display, e.g. monitor, video pro-
jector or second TV.
11
