Idiomas disponibles
Idiomas disponibles
• Connect the power supply unit to the HDMI switch and plug it into a power socket. Then
switch on the TV/video projector and the soundbar, then the switch. Switch on eARC on the
switch. Then start an HDMI source.
• Activate the eARC/ARC function on output A of the TV if it is not already active.
Caution: When plugging and unplugging the HDMI cables, make sure that the connector contacts
are not dirty or damaged. Make connections without power and switch on the units only after they
have been connected. Please also ensure that the HDMI cables are of good quality - especially for
4k transmission. We recommend a maximum of 5 m cable length at the inputs and a maximum of
3 m at the outputs for 4k HDR. HDMI fibre optic hybrid cables can be used for longer distances.
Automatic on/off/switching or HDMI CEC control.
These functions are generally NOT possible in a setup with 2 displays and HDMI-ARC. Switching
between the different feed players is done via the remote control of the VAX04201 or the button on
the front of the unit.
Remote control
The supplied infrared remote control controls all functions. Independent playback is possible via
the two displays. Example: Display A shows player 2, display B shows player 3 at the same time.
1. Switches the HDMI switch on or to standby.
2. Switches the eARC function on the switch on and off
When switched on, the sound bar delivers the sound
selected for Display A. Display A does not have to be
switched on for this. Display A does not have to be
switched on.
3. Select the source you want Display A to play back. If
the eARC function is switched on, select „1" to play the
internal TV sound via the sound bar.
4. Select the external player here that you want to play
back on Display B. Use the⏴ ⏵buttons to jump to the
previous or next HDMI input.
12
