cecotec GRANDHEAT 2500 Manual De Instrucciones página 67

ENGLISH
3. PRODUCT INSTALLATION
Countertop installation
Place the appliance on a flat, stable surface.
The minimum installation height is 85 mm.
The rear surface of appliance shall be placed against a wall.
Leave a minimum clearance of 30 cm above the microwave, a minimum clearance of 20 cm is
required between the microwave and any adjacent walls.
Do not remove the legs from the bottom of the microwave.
Blocking the intake and/or outlet openings can damage the microwave.
Place the microwave as far away from radios and TV as possible. Operation of microwave may
cause interference to your radio or TV reception.
Plug the device into a power supply.
Warning: Do not install microwave over a range cooktop or other heat-producing appliance.
If installed near or over a heat source, the microwave could be damaged, and the warranty
would be void.
4. OPERATION
Clock settings
When the device is plugged in, it will beep once.
Tap the clock icon to set the time. The hour digits will blink.
Turn the knob to set the correct hour, between 00 and 23.
Tap the clock icon. The minutes digits will blink.
Turn the knob to set the correct minutes, between 00 and 59.
Tap the clock icon to save the time settings.
Note: If the clock is not set, the current time will not be displayed when the device is turned on.
During the process of clock setting, tap the Stop/Clear icon to go back to the previous status
automatically.
Timer
Turn the Time/weight knob to increase or decrease the cooking time.
Note: If the clock has been set (24-hour system), the display will show the current time.
Pause or cancel
During the cooking process press the Stop/Cancel button once to pause or 2 to cancel the
cooking process. During the configuration of the cooking settings, press the button to cancel
67
GRANDHEAT 2500 FLATBED TOUCH WHITE