Idiomas disponibles
Idiomas disponibles
Failure Display and Inspection
If an abnormality comes up, the induction hob will automatically enter
the protective state and display the corresponding protective codes:
Problem
F3/F4
F9/FA
E1/E2
E3
E5
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers
and damages to the induction hob.
Becken Flex Induction Hob | Placa de Inducción Becken Flex | Placa de Indução Becken Flex
Becken_Placa de Indução_BIH3302_Manual_v3.indd 35
Possible causes
Failure of the
induction coil's
temperature sensor
Failure of the IGBT's
temperature sensor.
Abnormal supply
voltage
High temperature of
the induction coil's
temperature sensor
High temperature
of the IGBT's
temperature sensor
What to do
Please contact the
supplier.
Please contact the
supplier.
Please check whether
the power supply is
normal.
Switch the appliance
on once the power
supply is normal.
Please contact the
supplier.
Please restart once
the hob has cooled
down.
EN
35
06/04/2018 10:13
