Idiomas disponibles
Idiomas disponibles
4. Set a power level by touching the "-", "+", or slide along the "—"
control, or just touch any point of the "—".
Or
a) If you do not select a heat zone within 1 minute, the ceramic hob will
automatically switch off. You will need to start again at step 1.
b) You can modify the heat setting at any time during cooking.
c) If you slide along the "—", power will vary from stage 2 to stage 8.
Press "-", and power will be reduced in steps of one until stage 0.
Press "+", and power will be increased in steps of one until stage 9.
If the display flashes
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you are using is not suitable for induction cooking or,
• the pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking
zone.
The display will automatically turn off after 1 minutes if no suitable pan
is placed on it.
Becken Flex Induction Hob | Placa de Inducción Becken Flex | Placa de Indução Becken Flex
Becken_Placa de Indução_BIH3302_Manual_v3.indd 17
Or
alternately with the heat setting
EN
17
06/04/2018 10:13
