Worx WA3974 Manual Original página 9

FREQUENTLY ASKED
QUESTIONS
I CANNOT FIT THE BATTERY PACK INTO THE BATTERY
CHARGER. WHY?
a) Check if the charger and the battery pack are
specifically designed for working together.
b) The battery pack can be inserted into the charger only
in one direction. Turn the battery pack around until it
can be inserted into the slot, the indicator light should
be green and flash when the battery pack is charging.
REASONS FOR DIFFERENT CHARGING TIMES
The charging time can be affected by many reasons which
are not defects in your product.
a) If the battery pack is only partly discharged it may be
re-charged in less than rated charging time.
b) If the battery pack and ambient temperature are very
cold/hot, it may take longer to re-charge. Please find an
appropriate environment with proper air temperature
to start charging.
c) If the battery pack is very hot, remove battery pack
from the charger and allow battery pack to cool first
to ambient temperature and then recharging can be
started.
d) Batteries of higher Amp Hour rating require more
charging time.
STORAGE
Do not leave the battery packs in the basecamp for a long
time. Remove all the battery packs from the basecamp
after each usage.
MAINTENANCE
Remove the plug from the socket before carrying out
any adjustment, servicing or maintenance.
Your battery charger requires no additional lubrication
or maintenance. Never use water or chemical cleaners to
clean your charger. Wipe clean with a dry cloth. Always
store your charger in a dry place.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities or
retailer for recycling advice.
80V Basecamp-Battery Charger
& 80V Power Source
DECLARATION OF
CONFORMITY
We,
Positec Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
Declare that the product,
Description 80V Basecamp-Battery Charger & 80V
Power Source
Type WA3974
Complies with the following Directives,
2014/35/EU, 2014/30/EU, 2011/65/EU&(EU)2015/863
Standards conform to
EN 60335-1, EN 60335-2-29, EN 62233,
EN 55014-1, EN 55014-2, EN IEC 61000-3-2,
EN 61000-3-3
2021/02/13
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
9
EN