Idiomas disponibles
Idiomas disponibles
Malfunction
Not enough pressure can
be applied to the upper
blade.
Chicken feet fall out.
Cuts poorly
Does not cut
Shearing head gets very
hot
Translation of the original operating instructions / Shearing machine
Cause
Retaining spring broken.
Sliding sleeve is missing
(Fig. 1a, item 6)
Sliding sleeve is worn
(Fig 1a, item 6)
Swivelling fork is worn at
the top
Chicken feet are worn
(Fig 1a, item 2)
Securing cams on the re-
taining spring are broken.
Comb plate or upper blade
is blunt
Shearing tension too low
Blade was not sharpened
properly
Comb plate is not mounted
properly
Ball is missing (Fig. 1a,
item 25)
Faulty gear or reduction
gear (Fig. 1a, item 8)
Shearing head is worn out
(Fig. 1a, item 23)
Shearing tension too high
Ball (Fig. 1a, item 25) with-
out lubricant film
Sliding sleeve (Fig. 1a,
item 6) without grease
Bearings worn out
Rectification
Notify customer service
Replace sliding sleeve
Replace sliding sleeve
Notify customer service
Notify customer service
Notify customer service
Increase the pressure and
tighten the shearing pressure
adjustment knob (Fig. 3,
item 1).
Notify customer service
Move the upper blade back
to the comb plate by 1.5 mm
(Fig. 11)
Notify customer service
Replace gear
Notify customer service
See items 1-4
Reduce the shearing tension
and have the blades grounded
again if necessary
Oiling the ball
Greasing sliding sleeve
Notify customer service
17
