Idiomas disponibles
Idiomas disponibles
To remove blade (Fig. 4a, 4b, 4c)
WARNING
blade to cool down and wear gloves when
removing a saw blade.
1. Remove the battery pack from the tool.
2. Turn the tension lock lever located on the front
of the saw 180° COUNTERCLOCKWISE.
This releases the tension on the blade for
easy removal (Fig. 4a).
3. Turn the band saw over and place it on a
workbench or table with the front handle to
the right.
4. Lift both blade cover locks and open the blade
cover.
5. Begin removing the blade at the upper portion
of the blade guard (A) and continue around
the pulleys (B) (Fig. 4b). The blade may spring
free during removal. SAW BLADES ARE
SHARP. USE CARE IN HANDLING THEM.
6. The rubber surface of the pulleys should be
inspected for looseness or damage when
changing the blade. Wipe any chips from the
pulleys. This will extend the life of pulleys and
keep the blade from slipping.
The saw blade may be very
hot after use. Allow the
Fig. 4a
Tension Lock Lever
Fig. 4b
B
Pulleys
-13-
Blade Cover
A
B
