Idiomas disponibles
Idiomas disponibles
14.2
Security switch
This device is equipped with a secure switch. When pulling the pot out of the fryer during
it's working, the fryer will stop heating and timer on hold automatic until the pot is put back.
Please note
► It's better to pull out the pot not longer than 30s, to make sure the stable temperature
inside the pot to have better result.
14.3
Overheating protection
The device has an overheating protection. In case of too high temperature inside the
device close to electronic components the device will switch off automatically. Pull the plug
and let the device cool down at leat for half an hour.
14.1 Use of the BBQ Set
You can use the steak pan instead of frying basket.
In addition you can place the grill rack with meat skewers on the steak pan.
14.2
Commissioning
1. Connect the main plug into a socket. The device beeps and
display.
2. Unlock & Temperature setting: Press
The display shows „200°C" and „10 Min".Press
increase/decrease the temperature (in 5°C steps) Max.: 200°C, Min.: 60°C.
3. Time setting: Press
(in 1 Min. steps). Max.: 60 Min., Min. 1 Min. Start the device with
4. Let the device preheat for 3-4 Min. without food or add 3-4 Min. to your cooking time.
5. Pull out the frying basket/steakpan with the handle and fill it with your desired food.
Please note
► Never fill the basket/steakpan exceed the amount indicated in the table, as this could
affect the quality of the end result.
6. Slide the pot back into the fryer.
WARNING
► Never use the pot without the basket or steak pan in it.
to unlock the device.
and then
or
is flashing in the
and then
or
to to increase/decrease the time
.
to
38
