Before Initial Use; Secure Switch; Commissioning - CASO DESIGN AF200 Manual Del Usuario

14.1 Before initial use

 Thoroughly clean the basket and the pot with hot water, some washing-up liquid and a
non-abrasive sponge.
Please note
► You can also clean these parts in the dishwasher.
 Wipe the inside and outside of the appliance with a moist cloth.

14.2 Secure switch

This appliance is equipped with a secure switch. When pulling the pot out of the fryer
during it's working, the fryer will stop heating and timer on hold automatic until the pot is
put back.
Please note
► It's better to pull out the pot not longer than 30s, to make sure the stable temperature
inside the pot to have better result.
This appliance is equipped with a secure switch. When pulling the pot out of the fryer
during it's working, the fryer will stop heating and timer on hold automatic until the pot is
put back.

14.3 Commissioning

1. Connect the main plug into a socket. The device beeps and shows
2. Unlock & Temperature setting: Press
The display shows „180°C" and „10 Min". Press
the temperature (in 5°C steps) Max.: 200°C, Min.: 60°C.
3. Time setting: Press „+" or „–", to increase/decrease the time (in 1 Min. steps). Max.: 60
Min., Min. 1 Min.
4. Let the device preheat for 3-4 Min. without food or add 3 Min. to your cooking time.
5. Pull out the frying basket on the handle and fill it with your desired food.
Please note
► Never fill the basket exceed the amount indicated in the table, as this could affect the
quality of the end result.
6. Slide the pot back into the fryer.
Please note
► Never use the pot without the basket in it.
for 3 seconds to unlock the device.
or to increase/decrease
.
35