STAMOS TRON 200 ONE Manual De Instrucciones página 29

4) Make sure that the correct self-shielding welding wire is installed in the machine.
5) Plug the power cord into an electrical outlet and start the machine. After connecting the
mass cable to the workpiece, work can begin.
TIG welding
1) Connect the ground cable to the connector marked with a "+" sign and twist the cable plug to
secure the connection.
2) Connect the welding cable to the connector marked with the "-" sign and twist the cable plug
to secure the connection.
3) Connect the torch gas cable to the gas outlet connection on the front panel of the welder.
4) Connect the torch control cable to the control connector on the front panel of the welder.
5) Connect the shielding gas cylinder with a pressure reducer to the gas inlet on the rear panel
of the machine using a gas hose.
6) Plug the power cord into an electrical outlet and start the machine. After connecting the
mass cable to the workpiece, work can begin.