NOTE: If you operate from step 1 to step 2, the filter system will be
removed; on the other hand, if you operate from step 2 to step 1, the
filter system will be installed.
Filter assembly
For best performance and results, the filter assembly must be cleaned.
The filter efficiently removes food particles from the wash water,
allowing it to be recirculated during the cycle. For this reason, it is
a good idea to remove the larger food particles trapped in the filter
after each wash cycle by rinsing the semi-circular filter and cup under
running water. To remove the filter assembly, pull on the cup handle
in the upward direction. Please ensure that the entire filter assembly
is cleaned once a week. To clean the coarse filter and the micro filter
use a cleaning brush. Then, reassemble the filter parts as shown in
the figures above and reinsert the entire assembly in the dishwasher,
positioning it on its seat and pressing downward. Please be aware
that the dishwasher must never be used without these filters. Also,
improper filter replacement may reduce the performance level of the
appliance and damage dishes and utensils.
WARNING!
Never run the dishwasher without the filters in place. Be careful when
cleaning the filters, so as to not knock on them.
AF MANUAL MÁ Q . LOIÇ A ENCASTRE BBIDW5370 A5 (2).indd 33
AF MANUAL MÁ Q . LOIÇ A ENCASTRE BBIDW5370 A5 (2).indd 33
Dishwasher | Lavavajillas | Máquina de Lavar Loiça
EN
33
08/09/2020 12:09
08/09/2020 12:09