Becken BBIDW5370 Manual De Instalación página 14

Idiomas disponibles

A. Remove the lower basket, unscrew and remove the cap from the salt

container. See fig. 1

B. If you are filling the container for the first time, fill 2/3 of its volume

with water (around 500 mL). See fig 2

C. Place the end of the funnel (supplied) into the hole and add about

2 Kg of salt. It is normal for a small amount of water to come out of

the salt container.

D. Carefully screw the cap back on.

E. Usually, the salt warning light will be off in 2-6 days after the salt

container is filled with salt.

NOTE:

1. The salt container must be refilled when the salt warning light in the

control panel goes on. Though the salt container is filled enough, the

indicator light may not go off before the salt is fully dissolved. If there

is no salt warning light in the control panel (for some models), you

can judge when to load the salt into the softener by the cycles that

the dishwasher had run.

2. If there are spills of salt, a soak programme could be run to wipe

them out.

Filling the Rinse Aid Dispenser

Rinse aid is automatically added during the last rinse, ensuring

thorough rinsing, spot and streak-free drying.

Attention!

Only use branded rinse aid for dishwashers. Never fill the rinse aid

dispenser with any other substances (e.g. dishwasher cleaning agent,

liquid detergent), as this would damage the appliance.

AF MANUAL MÁ Q . LOIÇ A ENCASTRE BBIDW5370 A5 (2).indd 14

08/09/2020 12:09