Sonel CMP-2000 Manual De Uso página 31

7. Function/Range selector rotary switch
This rotary switch selects the function, and selects the desired
range.
8. INRUSH Button
The INRUSH function captures the starting current precisely in the
beginning of 100-millisecond period when current is just started.
The INRUSH function is used in the A AC range.
1. Press the INRUSH button to toggle in the INRUSH mode, and
the "----" and "INRUSH" will be displayed.
2. Press the trigger to open transformer jaws and clamp onto single
conductor only, and turn on the meter.
3. Read the INRUSH current directly from the display.
4. Depress the INRUSH button for more than 2 second to exit the
INRUSH mode.
5. Minimum input range: >100 dgts.
6. The readings of INRUSH measurements will show on the sub-
display.
7. Sampling frequency is 6x/100 ms (60 Hz).
9. MAX/MIN Button
The "MAX" displays the maximum value of measurements. The
"MIN" displays the minimum value of measurements. Press
MAX/MIN button for more than 2 seconds to exit. The recorded val-
ue of MAX/MIN function will show on the sub-display, and the value
being measured will show on the main-display.
10. Backlight Button
Press the button to activate the backlight for approximately 60
second.
CMP-2000 – USER MANUAL
29