Roland XV-3080 Manual Del Usuario página 174

Implementación MIDI
❍ Balance (Controller number 8)
Status 2nd byte
BnH 08H
n = MIDI channel number: 0H - FH (Ch.1 - 16)
vv = Balance: 00H - 7FH (0 - 127)
❍ Panpot (Controller number 10)
Status 2nd byte
BnH 0AH
n = MIDI channel number: 0H - FH (Ch.1 - 16)
vv = Panpot: 00H - 40H - 7FH (Left - Center - Right),
* Not received in Performance mode when the Receive Pan parameter (PERFORM/MIDI)
is OFF.
* In Performance mode the Part pan parameter (PERFORM/PART) will change.
❍ Expression (Controller number 11)
Status 2nd byte
BnH 0BH
n = MIDI channel number: 0H - FH (Ch.1 - 16)
vv = Expression: 00H - 7FH (0 - 127)
* Not received when Tone Receive Expression parameter (PATCH/TONE or RHYTHM/
TONE) is OFF.
* Not received in Performance mode when Receive Expression parameter (PERFORM/
MIDI) is OFF.
❍ Hold 1 (Controller number 64)
Status 2nd byte
BnH 40H
n = MIDI channel number: 0H - FH (Ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127) 0-63=OFF, 64-127=ON
* Not received when Tone Receive Hold-1 parameter (PATCH/TONE or RHYTHM/
TONE) is OFF.
* Not received in Performance mode when Receive Hold-1 parameter (PERFORM/MIDI)
is OFF.
❍ Portamento (Controller number 65)
Status 2nd byte
BnH 41H
n = MIDI channel number: 0H - FH (Ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON
* In Performance mode the Part Portamento Switch parameter (PERFORM/PART) will
change.
❍ Sostenuto (Controller number 66)
Status 2nd byte
BnH 42H
n = MIDI channel number: 0H - FH (Ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON
❍ Soft (Controller number 67)
Status 2nd byte
BnH 43H
n = MIDI channel number: 0H - FH (Ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON
❍ Legato Foot Switch (Controller number 68)
Status 2nd byte
BnH 44H
n = MIDI channel number: 0H - FH (Ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON
* In Performance mode the Part Legato Switch parameter (PERFORM/PART) will change.
❍ Hold-2 (Controller number 69)
Status 2nd byte
BnH 45H
n = MIDI channel number: 0H - FH (Ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127)
* A hold movement isn't done.
❍ Resonance (Controller number 71)
Status 2nd byte
BnH 47H
174
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
n = MIDI channel number: 0H - FH (Ch.1 - 16)
vv= Resonance value (relative change): 00H - 7FH (-64 - 0 - +63),
* In Performance mode the Part Resonance Offset parameter (PERFORM/PART) will
change.
❍ Release Time (Controller number 72)
Status 2nd byte
BnH 48H
n = MIDI channel number: 0H - FH (Ch.1 - 16)
vv = Release Time value (relative change):
* In Performance mode the Part Release Time Offset parameter (PERFORM/PART) will
change.
❍ Attack time (Controller number 73)
Status 2nd byte
BnH 49H
n = MIDI channel number: 0H - FH (Ch.1 - 16)
vv = Attack time value (relative change):
* In Performance mode the Part Attack Time Offset parameter (PERFORM/PART) will
change.
❍ Cutoff (Controller number 74)
Status 2nd byte
BnH 4AH
n = MIDI channel number: 0H - FH (Ch.1 - 16)
vv = Cutoff value (relative change): 00H - 7FH (-64 - 0 - +63)
* In Performance mode the Part Cutoff Offset parameter (PERFORM/PART) will change.
❍ Decay Time (Controller number 75)
Status 2nd byte
BnH 4BH
n = MIDI channel number: 0H - FH (Ch.1 - 16)
vv = Decay Time value (relative change):
* The decay time will change in GM mode.
❍ Vibrato Rate (Controller number 76)
Status 2nd byte
BnH 4CH
n = MIDI channel number: 0H - FH (Ch.1 - 16)
vv = Vibrato Rate value (relative change):
* The vibrato rate will change in GM mode.
❍ Vibrato Depth (Controller number 77)
Status 2nd byte
BnH 4DH
n = MIDI channel number: 0H - FH (Ch.1 - 16)
vv = Vibrato Depth Value (relative change):
* The vibrato depth will change in GM mode.
❍ Vibrato Delay (Controller number 78)
Status 2nd byte
BnH 4EH
n = MIDI channel number: 0H - FH (Ch.1 - 16)
vv = Vibrato Delay value (relative change):
* The vibrato delay will change in GM mode.
❍ General Purpose Controller 5 (Controller number 80)
Status 2nd byte
BnH 50H
n = MIDI channel number: 0H - FH (Ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127)
* The Tone Level parameter (PATCH/TONE) of Tone 1 will change.
❍ General Purpose Controller 6 (Controller number 81)
Status 2nd byte
BnH 51H
n = MIDI channel number: 0H - FH (Ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127)
3rd byte
vvH
00H - 7FH (-64 - 0 - +63),
3rd byte
vvH
00H - 7FH (-64 - 0 - +63),
3rd byte
vvH
3rd byte
vvH
00H - 7FH (-64 - 0 - +63)
3rd byte
vvH
00H - 7FH (-64 - 0 - +63)
3rd byte
vvH
00H - 7FH (-64 - 0 - +63)
3rd byte
vvH
00H - 7FH (-64 - 0 - +63)
3rd byte
vvH
3rd byte
vvH