Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
10. Insert eight Shelf Pins (BB) into the Shelf Pin
Holes in the cabinet. Place the Adjustable
Shelves (F) onto the Shelf Pins (BB).
11. Locate the Upper Back Panel (N) and the two
Side Back Panels (P) and attach them with
thirty-two Back Panel Screws (EE) as shown
in the diagram. Fully tighten the Back Panel
Screws (EE) with a screwdriver.
12. Insert the firebox into the mantel through
the back opening. Push the firebox forward
through the back opening until the metal trim
of the firebox is flush with the upright panels.
Once the firebox is in position, attach the two
mounting brackets included with the firebox by
inserting and tightening the Firebox Screws (LL)
through the mounting brackets in the firebox
and into the upright panels.
10
BB
F
11
P
EE
12
LL
7
F
N
P
