GE Profile PGP9830 Manual Del Propietario E Instrucciones De Instalación página 29

COOKTOP INSTALLATION (Cont.)
19. ASSEMBLE BURNERS, CHECK IGNITION
Assemble burner as shown.
Grate
Electrode
CAUTION
burner parts in place.
Medium
Head
and Cap
Medium
Head
and Cap
Front of Cooktop
that the heads and caps are placed on the correct
size burner. The burner
heads and burner bases
aid reassembly. There is
and cap.
Make sure the notch in the burner head is positioned
toward the electrode. Rotate the burner head around
the burner base until it is level and securely seated.
WHEN ALL HOOKUPS ARE COMPLETED
Make sure all controls are left in the off position. Make
sure the flow of combustion and ventilation air to the
cooktop is unobstructed.
49-2001159 Rev. 0
Installation Instructions
Curved side
toward the
center
Small
Head
and Cap
Head
and Cap
Check for proper ignition:
• The igniter will spark and the burner will light; the
igniter will cease sparking when the burner is lit.
• First test may require some time, while air is flushed
out of the gas line.
• Check to determine if your burner flames are normal.
If your burner flames look like A, turn off the burner
and make sure all parts are assembled correctly.
Reassemble and check. Normal burner flames
outer cones is normal.
A–Yellow flames B–Yellow tips
Call for service on outer cones
Normal for LP gas
• Turn knob to OFF.
• Repeat the procedure for each burner.
Check that all packing materials and tape have been
removed. This will include adhesive tape, wire ties,
cardboard and protective plastic. Failure to remove
these materials could result in damage to the appliance
once the appliance has been turned on and surfaces
have heated.
C–Soft blue
flames Normal
for natural gas
29