Idiomas disponibles
Idiomas disponibles
WARNING: ELECTRICAL SHOCK HAZARD
Do not use with damaged cord or plug.
Use with adequate electrical system that is
up to code. The supply cord has a
polarized plug. As a safety feature this
plug will fit in a polarized outlet only one
way. To prevent electric shock, match
wide blade of plug to wide slot, fully insert
plug. If the plug does not fit contact a
qualified electrician.
PREPARATION
Place the product on a firm, level surface and plug into a 120V 60Hz power outlet. Only operate product in upright
position.
TURNING HEATER ON
To start the heater, turn the ON/OFF Power Level Control from the OFF position to the LOW or HIGH
setting. Then rotate the Thermostat Control clockwise to the HIGH THERMOSTAT position as described below.
(During the heaters initial use, you may experience a slight odor or smoking. This is the result of the heating element
lubrication "burning off." This is normal and will go away after a few minutes of use.)
THERMOSTAT
:
DIAL
PET OWNERS NOTE:
The health of birds and some small pets
are extremely sensitive to the fumes given
off during the initial use of many
appliances. Although these fumes are not
harmful to humans, it is recommended
that this heater not be used around birds
and small pets during its initial use until
the manufacturing corrosion coatings burn
off.
CONTROL PANEL
POWER INDICATOR
LIGHT
ON/OFF POWER
LEVEL CONTROL
