Idiomas disponibles
Idiomas disponibles
Air Conditioner Operation
WARNING
To reduce the risk of fire, electrical shock, or injury to people or property, read the
SAFETY PRECAUTIONS before operating this appliance.
Cooling Operation
NOTICE
• The relative humidity of the room should be less than 80%. If the unit is used in a condition
with a relative humidity over 80%, there will be condensed water on the surface of the unit.
• Performance may be reduced outside of these operating temperatures.
NOTICE
Always wait 3 minutes when turning the unit off and then on again, or when changing from
cool to fan and back to cool. This prevents damage from occurring to the compressor.
To begin operating the air conditioner, follow these steps:
1.
Plug in the air conditioner (be sure to follow the power cord instructions).
2. Turn the power on to the air conditioner, using the ON/OFF button.
3. Set the thermostat to the coldest temperature setting.
4. Select the Cool mode setting.
5. Adjust the louver for comfortable air flow (see Air Directional Louvers).
6. Once the room has cooled, adjust the thermostat to the setting you find most comfortable.
7.
Make sure the air flow inside and outside is not obstructed by anything.
Air Directional Louvers
The louvers will allow you to direct the air
flow up or down (on some models) and left
or right throughout the room as needed.
Use the SWING button until the desired
up/down direction is obtained.
Move the louvers from side to side until the
desired left/right direction is obtained.
Outdoor temp.: 64°F ~ 109°F / 18°C ~ 43°C
Indoor temp.: 60°F ~ 90°F / 16°C ~ 32°C
Use SWING button for up/down direction
Adjust louvers for left/right direction
Air Direction
Page 9
