Window Requirements; Tools You Will Need - Midea MAW Serie Manual Del Usuario

WARNING - Before You Begin
Read these instructions completely
and carefully.
• IMPORTANT - Save these instructions.
• IMPORTANT - Observe all governing
codes and ordinances.
We recommend that two people
install this product.
Proper installation is the responsibility
of the installer.
Product failure due to improper
installation is not covered under the
Limited Warranty.
You MUST use all supplied parts and
use proper installation procedures as
described in these instructions when
installing this air conditioner.
Do not, under any circumstances, cut
or remove the third (ground) prong
from the power cord.
Do not change the plug on the power
cord of the air conditioner.
Aluminum house wiring may present
special problems - consult a qualified
electrician.
When handling the air conditioner, be
careful to avoid cuts from sharp metal
edges and aluminum fins on front and
rear coils. Please wear cut-resistant
gloves.
Bracket should only be used for
its intended purpose. If not, the
warranty will be voided.
 Page 14 

Window Requirements

Your air conditioner is designed to install in
standard double hung windows with opening
widths of 22 to 36 inches (558mm to 914mm)
and a window height of 13.75" (349mm).
SEAL FOAM
INNER
WINDOW SILL

Tools You Will Need

22" to 36"
(558 mm to 914mm)
13.75" min
(349 mm)
Vinyl-Clad Windows
Phillips
Screwdriver
Level
Flathead Screwdriver
Pencil
Ruler or tape measure
Scissors or knife
Drill and 1/8" drill bit
Proper PPE