Installation Requirements; Tools And Parts - Haier HCH2400ACB Manual Del Usuario

INSTALLATION REQUIREMENTS

TOOLS AND PARTS

Gather the required tools and parts before starting installation. Read and follow the
instructions provided with any tools listed here.
TOOLS NEEDED
•
Level
•
Drill with 1¼", ¹⁄₈", and ⁵⁄₁₆" Drill Bits
•
Pencil
•
Wire Stripper or Utility Knife
•
Tape Measure or Ruler
•
Pliers
•
Caulking Gun
PARTS NEEDED
•
6" (15.2 cm) dia. round metal vent duct - length required is determined by ceiling
height.
For non-vented (recirculating) installations, you will also need:
•
Air Deflector - Order Part #31206014
•
Charcoal Filters (pkg. of 2) - Order Part #31264001
To purchase these parts for your range hood, contact the Haier Customer
Satisfaction Center at 1-877-337-3639.
PARTS SUPPLIED
Remove parts from packages. Check that all parts are included.
•
120 V Power Cord (with 3 prong plug)
•
Hood Canopy Assembly (blower, vent
transition, light bulbs [pre-installed])
•
Metal Grease Filter
•
Vent Cover Support Bracket
•
Caulking Compound (weatherproof)
•
Vent Clamps
•
Jigsaw or Keyhole Saw
•
Flat-blade Screwdriver
•
Metal Snips
•
Phillips Screwdriver
•
Metric Hex Key Set
•
Two-Piece (Upper and Lower) Vent
Cover
•
Mounting Screws
•
Washers
•
Drywall Anchors
5