Marmitek MegaView 251 Pro Manual De Instrucciones página 4

Idiomas disponibles

Getting started

Installation tips

First switch off all devices (TV and HDMI sources) before connecting them to the



MegaView 251 Pro. If a device cannot be turned off, please remove its plug from

the wall socket.



For the best picture and sound quality, only use High Speed HDMI

cables.

Connecting the transmitter and receiver

In order to check proper functioning of the system, it is advisable to test the set-up first

using a short CAT5e/6 cable.

Connect the HDMI source to the MegaView 251 Pro transmitter [4], using a High

Speed HDMI

Optional: To continue viewing the HDMI feed in this room as well, use a High

Speed HDMI

OUT"[3]on the transmitter.

Connect the MegaView 251 Pro receiver to the display or projector [9] using a

High Speed HDMI

Use one CAT5e/6 Ethernet cable to connect the MegaView 251 Pro transmitter[2]

to the receiver [8].

Please note: The MegaView 251 Pro cannot be connected to an existing home

network (LAN), this may cause damage to the device.

Connect the power adapter [?] to the 'DC 24V' connection on the MegaView 251

Pro and plug the adapter into a power socket. The MegaView 251 Pro supports

bi-directional Power-over-Cable (PoC). This means that you can either connect

the power adapter to the transmitter or to the receiver. This eliminates the need

for two power adapters.

Please note: Do not place the MegaView 251 Pro transmitter or receiver in an

enclosed space, such as a TV cabinet or equivalent. Provide adequate ventilation to

ensure that the product is functioning properly and to protect against overheating.

certified cable.

certified cable to connect a display to the HDMI port marked "HDMI

certified cable.

transmitter

reciever

11 12

certified