Controls; Refrigerator And Freezer Controls; Setting Controls; Refrigerator Features - Sears Kenmore 10937045 Manual De Uso Y Cuidado

Refrigerador con montaje inferior
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Procedure
1
Remove plastic cap from water valve inlet port
A
m2
Z
¢3
i"
m
B
Plastic cap
B
Water valve inlet
port
Place brass nut and brass sleeve on copper tubing
(Brass nut and sleeve are found in your literature
packet.,) Insert copper tubing into water valve inlet
port.. Connect brass nut on copper tubing to water
valve inlet port. Make sure copper tubing is secure by
pulling on copper tubing
Controls
This refrigerator is designed to operate at normal
household temperatures of 55° to 110°F (13° to 43°C)
Refrigerator
and Freezer
Controls
Refrigerator control is located on upper rear wall of
refrigerator section.
A "P" clamp
B copper tubing
6
2
5
J
Freezer control is located on left front ceiling of freezer
section.
II
Freezer
__[[t .... ..... /l coo, o,
Setting Controls
+ B
When freezer control is set to OFF, neither refrigerator nor
freezer sections wilt cool
Initially, set both controls to 4.
Wait 24 hours for refrigerator and freezer sections to
stabilize temperatures° After 24 hours, adjust controls,
one number at a time, as desired_ ! is warmest setting
and 7 is coldest.
Set controls precisely using a household thermometer
D Brass nut
with a temperature range between -5 ° to 50°F
E
Water valve inlet
(-21 ° to 10°C).
C Brass sleeve
port
3_ Turn on water supply to refrigerator and check for
leaks. Correct any leaks at connection. Be careful not
to overtighten connection
4_ Create a service loop using extreme care to avoid
kinks_ Secure copper tubing to refrigerator cabinet
with a "P" clamp, It is important to secure copper
tubing to refrigerator to avoid leaks when pushing
refrigerator back into opening
Put thermometer' snugly between frozen packages in
freezer section..Wait 5-8 hours If freezer temperature is
not 0 ° to 2°F (-17 ° to -16°C), adjust freezer control 1
number at a time Check again after 5-8 hours.
Put thermometer in a glass of water in middle of
refrigerator section. Wait 5-8 hours= If refrigerator
temperature is not 38 ° to 40°F (3 ° to 4°C), adjust
refrigerator' control t number at a time.. Check again after
5-8 hours
Refrigerator
Features
Refrigerator
Shelves
Shelves adjust to meet individual storage needs° Some
models feature spillproof shelves and slide out shelves.
Spillproof shelves hold minor spills for easier cleaning_
CAUTION
I
Make sure shelf is secure before replacing items on
shelf to avoid property damage..
Tabla de contenido
loading

Tabla de contenido