Controls; Refrigerator And Freezer Controls; Setting Controls; Fresh Food Features - Sears Kenmore 57082 Manual De Instrucciones

Controls Fresh Food Features
This refrigerator is designed to operate at normal
household temperatures of 55 ° to 110°F (13 ° to
43°C).
Refrigerator and Freezer Controls
Refrigerator and freezer controls are located on
upper rear wall of refrigerator section.
CONTROL DIRECTIONS FREEZER REFRIGERATOR
'| I--
DASHES SHOW FACTORY 3 4 3 4
................ .©.
CHANGE ONE CONTROL AT
A T_MEWA_T24 HOURS
2 5
BETWEEN ADJUSTMENTS
FREEZERADJUSTMENTALSO • •
EFFECTS REFRIGERATOR
TEMPERATURE
WARMEST OFF COLDEST WARMEST OFF COLDEST
Setting Controls
When freezer control is set to OFF, neither
refrigerator nor freezer sections will cool. Initially, set
both controls to 4. Wait 24 hours for refrigerator and
freezer sections to reach desired temperatures. After
24 hours, adjust controls, one number at a time, as
desired. 1 is warmest setting and 6 is coldest.
Set controls with a household thermometer that
includes temperatures between -5 ° and 50°F (-21 °
and 10°C).
Put thermometer snugly between frozen packages in
freezer section. Wait 5-8 hours, tf freezer temperature
is not 0 ° to 2°F (-17 ° to -16°C), adjust freezer control,
1 number at a time. Check again after 5-8 hours.
Put thermometer in a glass of water in middle of
refrigerator section. Wait 5-8 hours. If refrigerator
temperature is not 38 ° to 40°F (3 ° to 4°C), adjust
refrigerator control, 1 number at a time. Check again
after 5-8 hours.
Fresh Food Shelves
Models feature either glass or wire shelves. Shelves
adjust up or down to meet individual storage needs.
Some models feature spill saving shelves. Spill saving
shelves hold simple spills for easier cleaning.
_, CAUTION: To avoid property damage, I
confirm shelf is secure before placing items on shelf.
CAUTION: To avoid personal injury or
property damage, handle tempered glass shelves
carefully. Shelves may break suddenly if nicked,
scratched, or exposed to sudden temperature
change.
• Remove shelves by lifting front, releasing hooks
from metal track then pulling out.
• Replace shelves by inserting hooks into metal
track and lowering front.
Slide out shelves pull forward for easy access of
items in back.