Idiomas disponibles
Idiomas disponibles
3. TRANSPORT, PACKAGING AND STORAGE
3.1 Inspection after transport
Verification of the absence of damage and the integrity of the device must be carried out upon receipt of the
package. In the event of identification of damage due to transport, refuse or accept the product delivered
only under reserve *. A complaint detailing the defects observed must then be made. The perception of
damages is only possible in the event of a complaint formulated within the time limits provided, ie 24-48
hours at the most.
* written on the right paper or digital delivery from the carrier.
3.2 Packaging
The packaging of the device must be kept in the event of a move, or for a return to the after-sales service.
The interior and exterior packaging must be completely removed before using the device. The standards in
force in your country concerning the protection of the environment must be respected before destroying the
packaging.
3.3. Storage
WARNING
The storage of the device in stock can be done but only in its original closed packaging.
Storage can be carried out under these conditions:
• Storage in a dry, non-humid place
• Sheltered from the sun
• Control of stock for more than 2 months (general condition of the device and all the elements that make it
up)
• No material shaking
• Storage in a closed room and not outside.
4. MATERIAL CHARACTERISTICS
* Subject to change
Model
Temperature
Supply voltage
Dimensions (mm)
Weight
Model
Temperature
Supply voltage
Dimensions (mm)
Weight
CSAP514
125W/230V/50Hz
W 1200 × D 335 × H 426
34.8kg
CSAP613
125W/230V/50Hz
W 1,500 × D 395 × H 426 W 1,800 × D 335 × H 426
45kg
CSAP413
0-12°C
125W/230V/50Hz
W 1200 × D 395 × H 426
40.5kg
CSAP814
0-12°C
140W/230V/50Hz
48.5kg
CSAP714
125W/230V/50Hz
W 1,500 × D 335 × H 426
43.5kg
CSAP813
140W/230V/50Hz
W 1,800 × D 395 × H 426
54.5kg
EN
