Beem W929735 Manual De Instrucciones página 42

Idiomas disponibles
  • ES

Idiomas disponibles

EN
3. Switch on the device by touching the fi eld
The control lamp STEAM / HOT WATER (27) fl ashes.
4. Once the device has reached the correct temperature, the control lamp STEAM / HOT
WATER lights up constantly and the device starts to emit water and milk residues are rinsed
out of the steam nozzle.
5. Wipe down the steam nozzle with a damp cloth.
If the steam nozzle has become clogged, you can release the blockage with the cleaning
needle.
Cleaning the Grinder
1. Make sure that the device has been disconnected from the mains power.
2. Turn the bean container (1) anticlockwise until the scale mark on the device and the scale
arrow with the lock symbol on the bean container are aligned (Picture F).
3. Pull the bean container up and off.
4. Empty the bean container and carefully remove the rest of the beans from the grinder (3).
Make sure that the catch at the bottom of the bean container is fully closed (Picture G).
5. Place the bean container back on the grinder: The scale arrow with the lock symbol on the
bean container and the scale mark on the device must be aligned. Twist the bean container
clockwise until the grinding fi neness scale is at the front.
If the bean container is not fi tted correctly, the fi elds
6. Plug the mains plug into the plug socket.
7. Switch on the device by touching the fi eld
The fi eld
fl ashes slowly and the fi elds
Once the preheating has ended, all operating fi elds and the control lamp STEAM / HOT
WATER (27) light up. The device is ready to operate.
8. Touch the fi eld
the grinder.
Once the rest of the coffee beans have been ground, you can tell this from the change in the
grinding noise.
9. Pull the plug out of the plug socket again.
10. Take off the bean container.
11. Grab the small clip on the grinding collar and twist the grinding collar to the left. It is released
from its locking mechanism and can be removed.
12. Clean the grinding collar with the cleaning brush. If necessary, you can also use a little water
and cleaning agent.
(30) or
(23), possibly several times, to grind the rest of the beans in
(22). The device switches to preheating mode.
(30) and
(22). The device switches to preheating mode.
and
light up.
42
(23) light up red.
loading