Cleaning The Steam Nozzle - Beem CM4637AG-GS Manual Del Usuario

33

Cleaning the Steam Nozzle

To prevent blockages, the steam nozzle (3) must be cleaned after each use.
1. Pull down the plastic attachment of the steam nozzle and clean the attachment with mild
detergent and warm water.
2. Turn the metal tube over the drip tray (11).
3. Turn the selector switch (15) to the
the metal tube.
4. Wipe down the metal tube with a damp cloth.
If the metal tube has become clogged, you can release the blockage with a needle.
Descaling
Limescale deposits have an adverse effect not only on the quality of the coffee and the water, but
they also cause power losses and shorten the lifespan of the device. The thicker a limescale layer is,
the more diffi cult it is to remove.
We therefore recommend regularly removing limescale deposits with a descaling agent in accord-
ance with the water quality in your area and how often the device is used (approx. every 2 – 6
weeks).
The fi rst indications that descaling is required are a large amount of steam being produced and
slower brewing of the coffee.
For descaling we recommend the BEEM premium descaler concentrate. The effi cient, food-safe and
environmentally friendly BEEM premium descaler concentrate is available from selected specialist
stockists, via our website www.beem.de or from our customer service department on request.
Descaling with the BEEM Premium Descaler Concentrate
1. Fill the water tank (18) up to the MAX marking with a concentrate/water solution of no
more than 1:20 (one part concentrate to 20 parts water).
2. Switch on the device by pressing the On / Off switch (16). The operating lamp (17) lights up
and the device starts the heating process.
3. Insert the portafi lter for powder and pad inserts (e) into the device (see the "Handling and
Operation" chapter – "Inserting the Portafi lter into the Device").
4. Place a suitable vessel under the portafi lter.
5. Start the brewing process as soon as the temperature lamp (2) is lit up by turning the selec-
tor switch (15) to the
through the portafi lter into the cup.
6. Allow roughly a third of the solution to run through and then turn the selector switch to the
position.
03260_03270_DE-EN-FR-ES-IT_Inlay_A5_V2.1.indb 33 03260_03270_DE-EN-FR-ES-IT_Inlay_A5_V2.1.indb 33
position to rinse milk and beverage residues out of
position. The device starts the brewing process, and water runs
EN
22.07.2021 11:31:00 22.07.2021 11:31:00