Idiomas disponibles
Idiomas disponibles
Assembly
Connecting the Poles
1. Connect the upper pole assembly with the middle pole
assembly. Align the screw holes (Fig. 5).
Fig. 5
Middle pole
assembly
2. Insert a bolt through the aligned holes in the poles and
secure the other end with a knob (Fig. 6). Twist until tight.
Fig. 6
Pole knob
3. Connect the upper pole + middle pole assembly with the
lower pole assembly. Align the screw holes (Fig. 7).
Fig. 7
Upper pole +
middle pole
assembly
4. Insert a bolt through the aligned holes in the poles and
secure the other end with a knob (Fig. 8). Twist until tight.
Fig. 8
Upper pole
assembly
NOTE: To avoid the wiring inside the poles intervening the
assembly, make sure to connect the upper pole assembly and
the middle pole assembly first. You may have to carefully move
the wiring inside the poles to one side when inserting the bolt.
Operation
m
toys or other foreign objects that the rotor blades might pick
up and throw. Such items could be covered by snow and are
easy to overlook, so be sure to conduct a thorough inspection
of the area before beginning work.
Starting the Machine
1. Slide the batteries down in the battery compartment until
Bolt
Fig. 9
2. To start the cordless snow shovel, push and hold the
Fig. 10
Lower pole
assembly
10
Pole knob
WARNING!
Keep the area to be cleared free of stones,
they click to lock into position (Fig. 9).
Battery
safety switch on the side of the handle grip with your
thumb and then squeeze the On/Off switch with your
fingers. Once the machine powers on, you can release the
safety switch and proceed with operation (Fig. 10).
Safety switch
On/Off switch
Bolt
Battery compartment
