Idiomas disponibles
Idiomas disponibles
normally break apart during this
test time.
h) Wear personal protective
equipment. Depending on
application, use face shield,
safety goggles or safety
glasses. As appropriate,
wear dust mask, hearing
protectors, gloves and
workshop apron capable
of stopping small abrasive
or workpiece fragments.
The eye protection must be
capable of stopping flying
debris generated by various
operations. The dust mask or
respirator must be capable of
filtrating particles generated
by your operation. Prolonged
exposure to high intensity noise
may cause hearing loss.
i) Keep bystanders a safe
distance away from work
area. Anyone entering the
work area must wear personal
protective equipment.
Fragments of workpiece or of
a broken accessory may fly
away and cause injury beyond
immediate area of operation.
j) Hold the power tool by
insulated gripping surfaces
only, when performing an
operation where the cutting
EN - 8
tool may contact hidden
wiring. Contact with a "live" wire
will also make exposed metal
parts of the power tool "live"
and could give the operator an
electric shock.
k) Position the cord clear of the
spinning accessory. If you lose
control, the cord may be cut or
snagged and your hand or arm
may be pulled into the spinning
accessory.
m) Never lay the power tool
down until the accessory has
come to a complete stop. The
spinning accessory may grab
the surface and pull the power
tool out of your control.
m) Do not run the power tool
while carrying it at your
side. Accidental contact with
the spinning accessory could
snag your clothing, pulling the
accessory into your body.
n) Regularly clean the power
tool's air vents. The motor's
fan will draw the dust inside
the housing and excessive
accumulation of powdered metal
may cause electrical hazards.
o) Do not operate the power tool
near flammable materials.
Sparks could ignite these
materials.
WWW.SENIXTOOLS.COM
