Idiomas disponibles
Idiomas disponibles
GRINDING WHEEL
WARNING:
To reduce the risk of injury, use only accessories
rated at least equal to the maximum speed
marked on the tool.
1. Fit the inner flange on spindle.
2. Lay the grinding wheel flat on the inner flange.
3. Attach the convex side of outer flange to the grinding
wheel and secure it with assistance of wrench while
pressing the spindle lock.
NOTE:
For cutting, match concave surface to the cutting wheel.
4. Remove wrench and release the spindle lock when the
outer flange get enough tightened.
WARNING:
Never press the spindle lock when the spindle
is running.
EN - 16
Outer Flange
Grinding Wheel
Inner Flange
BATTERY PACK
WARNING:
Make sure the on/off switch is off before
mounting the battery pack.
To install:
Align and slide the battery pack to the docking port until it is
locked in place.
To remove:
Press the unlock button on battery pack and slide the
battery pack out.
Unlock Button
WWW.SENIXTOOLS.COM
