Health O Meter 499KL Manual Del Usuario página 11

SET UP INSTRUCTIONS (CONTINUED)
Locking Unit of Measure (LB or KG)
(499KL only, this feature is not available on 499KG)
The weight measuring unit (pounds / LB or kilograms / KG) can be locked to display
weight only in the selected unit of measure. The unit of measure lock default setting is
"unlocked". Follow this procedure to lock the UNIT button. Note: If Everlock
this feature will not appear in the Options mode.
1. While the scale is turned off, press and hold the ENTER button then press and
release the ON/OFF button. Hold the ENTER button until "AOF=d" or "AOF=E"
appears on the display, then release. Use the ▲ or ▼ buttons to advance the display
screen until "Unt" appears. Press the ENTER button to change the setting.
Unt = U Allows the user to toggle weight measurement between LB and KG.
Unt = L Locks the unit button so weight is only displayed in pounds (LB)
Unt = G Locks the unit button so weight is only displayed in kilograms (KG)
2. Choose the setting you prefer and press CLEAR to save your selection and exit the
options mode.
3. The scale will restart. The display will show "UEr", followed by a version number,
and then dashes. When the display shows "0.0" the scale is ready to use.
Setting Auto Zero
This option allows the user to select whether the scale will re-set itself to ZERO each time
it is powered up or whether it will use the zero reading from the last time it was zeroed.
The auto zero default setting is "enabled" Follow this procedure to enable or disable this
feature.
1. While the scale is turned off, press and hold the ENTER button then press and
release the ON/OFF button. Hold the ENTER button until "AOF=d" or "AOF=E"
appears on the display, then release. Use the ▲ or ▼ buttons to advance the
display screen until "PU2" appears. Press the ENTER button to change the setting.
PU2 = d Disabling this feature means the scale does not attempt to find a zero
when powered on, rather it will use the zero setting it had from its most
recent use. Health o meter
option is selected, users should manually zero the scale before each
weight measurement by
pressing ZERO / TARE. Users will see dashes on the screen as the scale
is finding zero.
PU2 = E Enabling this feature means the scale will zero itself when it is powered
on. After each use, the scale will clear the weight of the patient and set
itself back to the initial zero level it found on start-up. Health o meter®
Professional recommends keeping this setting as Enable.
2. Choose the setting you prefer and press CLEAR to save your selection and exit the
Options mode.
3. The scale will restart. The display will show "UEr", followed by a version number,
and then dashes. When the display shows "0.0" the scale is ready to use.
UM499KL REV20210521
®
Professional recommends that if the Disable
11
Back to Home Page
®
is engaged,