Makita AN924 Manual De Instrucciones página 7

4. Return the pusher lever.
CAUTION:
Do not put your finger on the rail
of the pusher lever. Doing so may cause personal
injury by the pusher lever swiftly returns to the firing
opening.
Correct loading of the nails
CAUTION:
Be sure to load nails in the correct
direction.
Be sure to load the nail at the correct angle. Nails will be
parallel with the driver guide if correctly set.
When loading two or more strips of the nails, set the
nail head of the latter strip properly overlaps that of the
former strip.
Always set the lock of the pusher lever to hold the nail
head as illustrated.
► 1. Lock of the pusher lever
Connecting air hose
CAUTION:
Do not rest your finger on the
trigger when connecting the air hose.
► 1. Air fitting 2. Air socket
Slip the air socket of the air hose onto the air fitting on
the tool. Be sure that the air socket locks firmly into
position when installed onto the air fitting.
A hose coupling must be installed on or near the tool in
such a way that the pressure reservoir will discharge at
the time the air supply coupling is disconnected.
OPERATION
CAUTION:
Make sure all safety systems are in
working order before operation.
7 ENGLISH
1
2
1