TFA 60.2033.10 Instrucciones De Uso página 9

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
TFA_No. 60.2033_Anleitung
Digital alarm clock with induction charger
1. Delivery contents
• Digital alarm clock
• Power adaptor
• Instruction manual
2. Range of application and all the benefits of your new instrument at a glance
• Inductive charging station (10 W, according to Qi standard) and USB charging
function (1 A) for mobile devices
• Height-adjustable charging coil for optimal charging position
• White LED digits with 2 brightness levels or adaptive brightness adjustment via
light sensor
• Alarm with snooze function
• For all Qi enabled smartphones and for smaller tablets
• Also ideal as a holder during video calls or video conferences
• Non-slip stand with 4 rubber pads
3. For your safety
• This product is exclusively intended for the range of application described above. It
should only be used as described within these instructions.
• Unauthorised repairs, alterations or changes to the product are prohibited.
Caution!
Risk of electrocution!
• Plug the device only into a mains socket installed within your country's electrical
safety regulations and with a correct mains voltage (see nameplate).
• The mains socket must be located near the equipment and it must be easily accessi-
ble.
• Unplug the device immediately if any fault occurs.
• The device and the power adapter must not come into contact with water or
moisture. Suitable for indoor use only.
• Do not use the device if the housing or the power adapter are damaged.
• Operate the device out of reach of persons (including children) who cannot fully
appreciate the potential risks of handling electrical equipment.
• Only use the supplied power adapter.
• Connect the lead to the device first and then plug the power adapter into the socket.
• Do not pull the plug out of the socket by its cable.
• Route the mains cable so it does not come into contact with sharp-edged or hot
objects.
WARNING
• Keep this device and the batteries out of reach of children.
• Small parts can be swallowed by children (under three years old).
08.08.2022
11:43 Uhr
Seite 9
– 16 –
Digital alarm clock with induction charger
• Batteries contain harmful acids and may be hazardous if swallowed. If a battery is
swallowed, this can lead to serious internal burns and death within two hours. If
you suspect a battery could have been swallowed or otherwise caught in the body,
seek medical help immediately.
• Batteries must not be thrown into a fire, short-circuited, taken apart or recharged.
Risk of explosion!
• Low batteries should be changed as soon as possible to prevent damage caused by
leaking. Make sure the polarities are correct. Never use a combination of old and
new batteries together, nor batteries of different types.
• Avoid contact with skin, eyes and mucous membranes when handling leaking bat-
teries. In case of contact, immediately rinse the affected areas with water and con-
sult a doctor.
CAUTION
• Unauthorised repairs, alterations or changes to the product are prohibited.
• Do not expose the device to extreme temperatures, vibrations or shocks.
• Clean the device with a soft damp cloth. Do not use solvents or scouring agents.
• Protect the device from overheating and provide sufficient ventilation during opera-
tion. Make sure that the device is placed on a solid surface.
• If the mobile device becomes hot while charging or the battery is no longer
charged, this is a sign of a defect. Disconnect the mobile device from the charging
power source immediately.
• Remove in case your metallic phone cover and do not place any metal objects on
the charging pad.
• Do not place any other objects on the charging pad.
• Remove the batteries and pull out the plug of the socket if the device will not be
used for an extended period of time.
5. Elements
A: Front (Fig. 1):
A 1:
Light sensor
A 2:
Time
A 3:
SNOOZE sensor button (appears only in the event of an alarm)
A 4:
Alarm symbol
A 5:
Charging indicator light
A 6:
Charging pad
B: Left side (Fig. 2):
B 1:
ALARM ON/OFF switch
B 2:
SET button
C: Right side (Fig. 3):
C 1:
button
C 2:
button
– 17 –
loading