Idiomas disponibles
Idiomas disponibles
◾
Disconnect charger from the power supply
when not in use. This will reduce the risk of electric
shock or damage to the charger if metal items should
fall into the opening. It will also help prevent damage
to the charger during a power surge.
◾
Risk of electric shock. Do not touch the uninsulated
portion of output connector or uninsulated battery
terminal.
◾
Save these instructions. Refer to them frequently
and use them to instruct others who may use this tool.
If you lend this tool to someone else, also lend these
instructions to them to prevent misuse of the product
and possible injury.
IMPORTANT SAFETY INSTRUCTIONS
◾
Save these instructions. This manual contains
important safety and operating instructions for EGO
56V Charger CH3200E.
◾
Before using the battery charger, read all
instructions and cautionary markings on the
battery charger, the battery and the product
using the battery.
WARNING:
When using electric appliances, basic
precautions should always be followed, including the
following.
◾
To reduce the risk of injury, close supervision is
necessary when an appliance is used near children.
◾
Only use attachments recommended or sold by
manufacturer.
◾
Do not use outdoors.
◾
For a portable appliance – To reduce the risk of
electrical shock, do not put charger in water or other
liquid. Do not place or store appliance where it can fall
or be pulled into a tub or sink.
CAUTION:
To reduce the risk of injury, charge
only lithium-ion rechargeable batteries. Other types of
batteries may burst, causing personal injury or damage.
SPECIFICATIONS
Charger Input
220-240 V~50 Hz, 320 W
Charger Output
4.7A 56 V
35 minutes for 2.5 Ah battery pack
55 minutes for 4.0 Ah battery pack
70 minutes for 5.0 Ah battery pack
Charging Time
80 minutes for 6.0 Ah battery pack
100 minutes for 7.5 Ah battery pack
130 minutes for 10 Ah battery pack
160 minutes for 12 Ah battery pack
Optimum
Charging
5°C-40°C
Temperature
1.12 kg
Charger Weight
DESCRIPTION
KNOW YOUR CHARGER (Fig. A)
1.
Cooling Air Port
2.
LED Indicator 2
3.
LED Indicator 1
4.
Mounting Slot
5.
Electrical Contacts
6.
Wall Mounting Holes
OPERATION
HOW TO CHARGE THE BATTERY PACK
WARNING:
Do not use the charger outdoors or
expose it to wet or damp conditions. Water entering the
charger will increase the risk of electric shock.
NOTICE: Lithium-ion battery packs are partially
charged before shipping. Before using it for the first
time, fully charge the battery pack.
1. Connect the charger to the power supply
(220-240V ~ 50Hz). LED Indicator 1 briefly shines
green and LED Indicator 2 briefly shines red at the
same time, indicating that the charger is working
properly.
2. Align the raised ribs of the battery pack with the
mounting slots in the charger; slide the battery pack
down onto the charger, as shown in Fig. B.
3. The charger will communicate with the battery pack
to evaluate the condition of the battery pack.
320W CHARGER — CH3200E
EN
5
