Idiomas disponibles
Idiomas disponibles
Installation (continued)
6
Completing Installation
□ Insert foam seal (BB) behind the top of the lower window sash (A) and against the glass of the upper window.
□ Use a 1 /8 inch (3 mm) drill bit to drill a starter hole through the hole in the top rail.
□
Attach top rail to window sash with one 3/4 inch (19 mm)screw to secure window in place.
□
Check the gap (D) around the unit and seal it with the adhesive seal (black) (A2) attached.
DANGER: ELECTRICAL SHOCK HAZARD
□ Plug into a grounded 3-prong outlet.
□ Do not remove ground prong.
□ Do not use an adapter.
□ Do not use an extension cord.
□ Failure to follow these instructions can result in death,
fire, or electrical shock.
□ Plug into a grounded 3-prong outlet.
□ Press RESET on the power supply cord. See "Electrical Requirements".
A
D
13
BB
