Installation Preparation - GE JNXR22 Manual Del Propietario E Instalación

PRODUCT DIMENSIONS
Top View
18"
15"
22"
Front View
TOOLS AND MATERIALS
REQUIRED (NOT SUPPLIED)
Pencil and tape measure
Spirit level
Electric drill, #2 Phillips,
flat head, and 9 32 " drill bit
HARDWARE COMPONENTS
Wood Screw (x4)
49-2001088 Rev. 2

Installation Preparation

2"
7-1/2"
18"
2-1/8"
4-1/2"
Safety glasses
Gloves
Phillips or flat
screwdriver
MOUNTING SPACE
NOTES:
• Hood width may be greater than the width of the
range or cooktop, but it may not be smaller.
• Installation height should be measured from the
cooking surface to the lowest part of the hood. This
hood must be installed onto a cabinet.
REMOVE THE PACKAGING
CAUTION
Wear gloves to protect against
sharp edges.
• Remove the hardware bag, literature package and
other boxed parts.
• Remove and properly discard the protective plastic
wrapping and other packaging materials.
PLAN THE INSTALLATION
CAUTION
To reduce the risk of fire and to
properly exhaust air, be sure to vent in an open
space or outside – Do not vent exhaust air into
spaces within walls or ceilings.
PARTS SUPPLIED FOR
INSTALLATION
• 4 wood screws
• 1 User/Installation Manual
• Product Registration Card
19-1/2" minimum
if installation
complies with
NFPA1192 table
5.6.6.5 For vertical
Clearance to
combustible
materials /
metal cabinet
requirements.
7