Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
PREVIOUS CONFIGURATIONS
CHANGE LANGUAGE
- Long press the PLAY/PAUSE button on the front panel to change the language.
- Languages available: English, Spanish.
EQUALISATION
- Make a long press on the PRE/EQ button:
- Use the buttons
- Use the MONITOR control to scroll through the columns in the table.
- Use the SPEAKER control to change the selected value.
NOTE: press the PLAY/PAUSE button to set the BYPASS value to LPF (low pass filter) and HPF (high
pass filter), and press again to return to the previous values.
1
- Once the changes have been made, click on the EXIT button to exit the configuration.
VOTING MODE
PUSH
The SCD-600 digital conference system allows a vote to be taken and the results to be viewed in real time.
Each microphone base of the chairman and delegate can cast one vote when the voting mode is activated.
The maximum time for voting is a software configurable parameter. When this time expires, no more votes
can be cast and the result of the vote will be displayed on the main unit screen or in the PC software.
- To activate the voting mode, press and hold the DISCUSS MODE/VOTING button
for 3 seconds and the display will show the following information.
- Press the PLAY/PAUSE button to start voting.
- Once voting begins, attendees will be able to cast their vote using the 3 touch
buttons on the bases of each voting microphone:
and
to abstain. Pressing one of the options on the screen will display a message
to confirm the vote.
- If you wish to stop voting early, press the STOP button on the central unit.
- Once voting is complete, the screen will display the result.
- To exit the voting mode press the REC/EXIT button.
8 9
NOTE: via the PC control software, it is also possible to control the voting, adjust the voting time, display
the voting result and other functions described in the software manual which can be found at: www.fonestar.
com/SCD-600.
DISCUSSION MODE
The discussion mode consists of the normal operation of a conference system in which one or more
attendees take part in a discussion. Speaking turns are directly controlled by the central unit according to
the pre-setting of this mode.
- The first setting required is the maximum number of delegate microphones that can be active at one time,
11
you can select 1, 3, 6, 9 or all active. Press the DISCUSS MODE button to change this option.
- The second is the way to manage the speaking time when the maximum number of simultaneously active
microphones has been reached. There are 2 ways to manage new requests for speaking time: FIFO mode
and LIMIT mode.
to scroll through the table rows.
2
3
10
4
5 6 7
1
1
PUSH
PUSH
to vote in favour,
4
5 6 7
8 9
11
- 6 -
Voting
Ready!
Press [play] to start voting!
2
0
3
Voting
against
Voting!
Press [stop] to stop voting!
---
Voting
Stop!
8 9
10
Press [play] to start Again!
0
10
11
2
Votación
3
Preparado!
Pulse [play]
0
0
0
Time: 00:00:00
Votación
Votando!
Pulse [stop
---
---
---
Time: 00:08:00
Votación
Parar!
Pulse [play]
3
0
0
Time: 00:10:00
Tabla de contenido
