Tabla de contenido
Idiomas disponibles
Idiomas disponibles
DMX OPERATION
Making the DMX Connection – Connect the machine to a DMX controller or to one of
the machines in the DMX chain. The machine uses a 3-pin XLR connector for DMX
connection, the connector is located on the rear of the machine.
DMX Connector Pin Assignment
The machine provides a 3- pin XLR connector for DMX connection.
Address Setup – Use control menu to set DMX address. The machine occupies 2
control channels. The starting address is defined as the first channel from which the
machine will respond to the controller. Always double check to make sure there are no
overlapping channels in order to control the machine correctly.
DMX CHANNEL FUNCTION
CHANNEL
CH1
CH2
VALUE
000 - 005
006 - 255
000 - 005
006 - 255
FUNCTION
FAN OFF
1 - 100% FAN SPEED
FOG OFF
1 - 100% FOG OUTPUT
5
Tabla de contenido
