Installation; Location; Installation Location; Recommended Installation Distances - Salicru EQUINOX EQX2 4002-T Manual De Usuario

5. INSTALLATION

5.1. LOCATION.

The inverters of the EQX2 series have been designed with an
enclosure with IP65 degree of protection, suitable for indoor and
outdoor installations. The following factors should be taken into
account when selecting an installation location for the inverter:
1.
The wall on which the inverters are mounted must be able to
support the weight of the inverter.
2.
The inverter must be installed in a well-ventilated environment.
3.
Make sure that the inverter is not exposed directly to strong
sunlight to avoid operation at excessive temperatures.
The inverter should be installed in a place sheltered from direct
sunlight and rain.
4.
Install the inverter at eye level for easy reading of the data on
the screen and better maintenance.
5.
The ambient temperature of the place where the inverter is
installed must be between -30ºC and +60ºC.
6.
The surface temperature of the inverter can reach up to 75ºC.
To avoid the risk of burns, do not touch the inverter during
operation and install it out of the reach of children.

5.1.1. Installation location.

We recommend installing inverters indoors. However, if
there is no choice but to install outdoors, in Fig. 17 shows
recommended locations, as well as those to avoid:
Fig. 17. Recommended locations for the inverter.
Do not store flammable and/or explosive materials near
the inverter.
Warning

5.1.2. Recommended installation distances.

Installation angle and
installed on a vertical surface and that it keeps the following
minimum safety distances with respect to other elements for
optimal ventilation, as shown in Fig. 18:
60
spacing: Check that the inverter is
Fig. 18. Recommended installation distances.
EQX2 4002-T .. EQX2 25002-T
EQX2 33004-T, EQX2 40004-T,
EQX2 50004-T, EQX2 60004-T
EQX2 100010-T

5.2. ASSEMBLY PROCESS.

Steps:
5.2.1. 2 MPPT units (EQX2 4002-T .. EQX2 25002-T).
A B
300
500 800
1000
SALICRU