Installation - modbar espresso system Manual

3. Installation

WARNING
In order to prevent cracks or
leakage: do not store or install
the machine in places where
in boiler or hydraulicsystem to
freeze.
WARNING
For the connection of the
machine, it must be provided a
suitable disconnection device
near the installation, so that
in case of trip, it is possible to
operate the device near the
machine.
WARNING
Installation on the counter:
For cutting the counter refer to
cutting template placed inside
the package.
10
WARNING
The machine is intended to be
permanently connected to fixed
wiring, and it is mandatory that
a residual current device (RCD)
with a rated residual operating
current not exceeding 30mA is
installed.
WARNING
At each installation, the machine
should be equipped with a new
set of tubes for plumbing and
related gaskets.
WARNING
Hazardous voltage disconnect
from power supply before
servicing.
WARNING
This machine should not be
installed in kitchens.
WARNING
Replace fuses with the same size,
type and rating. e.g. F1 = 2A, 250V
WARNING
The manufacturer declines
any responsibility for any
event leading to liability suits
whenever grounding has not
been completed according to
current local, national, and
international regulations and
electrical codes, or other
electrical parts have been
connected improperly.