Bartscher 700378G Instrucciones De Uso página 32

LED indicators
LED cooling indicator
This indicator shines when the compressor is active,
goes off when the desired temperature has been reached and
flashes during a delay
LED defrost indicator
This indicator shines during the defrost process,
goes off when the defrost process is finished and
flashes during extended defrost.
Setting the desired temperature
•
The device's temperature range is from 4 ° C to 12 ° C.
•
To set or adjust the desired temperature:
press the
raise or lower the value as desired by pressing
confirm the set temperature by pressing
•
If no button is pressed within the following 10 seconds, the current temperature
inside the device will be shown on the digital display.
Turning the lighting on/off
•
The device is equipped with 4 LED lighting strips (2 at the front and 2 at the rear).
•
The interior LED lighting can be activated by pressing the button
•
To turn the lighting off, press
Automatic defrost
The device is automatically defrosted 4 times every 24 hours
Manual defrost
If you wish to defrost the device outside of its normal cycle, press and hold
over 6 seconds to activate manual defrost.
- 28 -
.
button, after which the current value will begin flashing
again.
or ;
.
.
;
.
for