To Stop The Product - Husqvarna LE 322R Manual De Usuario

To use the drive on the wheels
1. Push the drive control buttons on the
handlebar.
2. Move the drive speed control to set the drive
speed. Move the drive speed control down for
slower speed. Move the drive speed control
up for faster speed.
3. Release the drive control buttons to
disengage the drive, for example when you go
near an obstacle.

To stop the product

1. Release the motor brake handle to stop the
motor.
16
2. Press the ON/OFF button (A) on the control
panel and the green LED (B) goes out.
A
B
Note:
The control panel is automatically set
to OFF if you do not operate the product or
push buttons for 2 minutes.
3. Open the battery lid.
4. To remove the battery, push the 2 release
buttons and pull out the battery.
5. Charge the battery if it is weak. For more
information, refer to.
page 13 .
To get a good result
• Always use a sharp blade. A blunt blade gives
an irregular result and the cut surface of the
grass becomes yellow. A sharp blade also
uses less energy than a blunt blade.
1
2
To charge the battery on
1840 - 004 - 18.10.2022