Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Vibrations per minute
Vibration head diameter
Flexible shaft lengths
Overall length
Rated voltage
Net weight
1
*
with 1.7 m (5.6 ft) flexible shaft
2
*
with battery BL4040
3
*
with 2.4 m (7.9 ft) flexible shaft
4
*
with battery BL4080F
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachments, including accessories (flexible shaft, battery case) and
battery cartridge. The lightest and heaviest combinations, according to EPTA-Procedure 01/2014, are shown in
the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
•
The cord connected power source(s) listed above may not be available depending on your region of residence.
•
Before using the cord connected power source, read instruction and cautionary markings on them.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Normal mode
Power mode
GRV01
ø32 mm (ø1-1/4")
1.7 m (5.6 ft)
1,995 mm (78-1/2")*
D.C. 36 V - 40 V max
4.8 - 7.8 kg (10.6 - 17.2 lbs)
BL4020 / BL4025 / BL4040* / BL4050F* / BL4080F*
* : Recommended battery
DC40RA / DC40RB / DC40RC
Work area safety
1.
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3.
Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1.
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
2 ENGLISH
GRV02
12,000 /min
15,500 /min
ø38 mm (ø1-1/2")
2.4 m (7.9 ft)
1
2
*
2,507 mm (98-1/2") *
4.9 - 7.8 kg (10.8 - 17.2 lbs)
PDC01 / PDC1200
3
4
*
Tabla de contenido
