Optional Accessory - Makita GRV01 Manual De Instrucciones

If the coupling does not reach or fit securely onto the male
thread of the tool, especially when installing a long flexible
shaft, pull the outer casing further towards the tool while
hand-turning the flexible core shaft so the shaft top well fits into
the shaft slot in the vibration head and becomes fully engaged.
1
Fig.20
► 1. Outer casing 2. Flexible core shaft
5. Knock each of the three corners of triangular
coupling with a hammer a few times in random order to
secure assembly.
Fig.21
Uninstallation
Follow the installation steps in reverse order.
Installing shoulder strap

Optional accessory

WARNING:
Always remove the shoulder strap
from the tool while wearing portable power packs.
Wearing multiple harnesses and straps may impair
the chances to take the equipment off quickly in a
case of emergency and result in personal injury.
WARNING:
Do not use the parts for attaching
the shoulder strap for other purposes, such as the
fall prevention at high location. If the parts for attaching
the shoulder strap are used for other purposes, excessive
load may break them and cause serious injury to the oper-
ator and person around/underneath the operator.
CAUTION:
Be sure to attach the hooks of the
shoulder strap to the tool securely. If the hooks are
attached incompletely, they may come off and cause injury.
CAUTION:
Be sure to use the shoulder strap dedicated
to this tool. Using other shoulder strap may cause an injury.
Hang the hooks of the shoulder strap over the hanging
holes on top of the tool.
2
Fig.22
► 1. Shoulder strap 2. Hook 3. Hanging hole
OPERATION
shoulder, and hold the tool firmly with both
hands.
NOTICE:
flexible shaft tends to vibrate at a higher ampli-
tude. The tool will restore the normal amplitude
after you squeeze and release the switch trigger a
few times repeatedly.
Make sure to throw in and keep the vibration head
stand straight during operation. Use the tool within the
effective vibration ranges at equidistant intervals. The
effective air bubble removal range is approximately ten
times the diameter of vibration head.
Fig.23
11 ENGLISH
CAUTION:
Put the shoulder strap on the
At the very beginning of operation, the
1
2
3