Tabla de contenido
K281X042
Installation and operation instruction
Actuator 24 V, 0÷10 V
Fitting and Re-fitting
Do not connect power to the actuator unless the actuator is already fitted on the valve and NEVER
install the actuator in closed position - this may damage the valve. Actuator is supplied in open
position to ensure easy commissioning of the system.
Mount the actuator on the valve and finger tighten the connection union. Do not use additional tools.
Figure 1
In case the actuator will have to be removed, it is recommended to electrically open the actuator for easier
removal. Hereafter disconnect power and finger loosen the connection union.
Please make sure that the actuator is electrically opened, before re-fitting it on the valve.
Figure 2
Giacomini S.p.A.
Via per Alzo 39, 28017 San Maurizio d'Opaglio (NO) Italia
+39 0322 923372 - giacomini.com
Instruction
11/2022
1
Tabla de contenido
