Cleaning The Guide Bar And Saw Chain; Inspection And Maintenance; Inspecting And Maintaining The Chain Saw; Inspecting And Maintaining The Chain Sprocket - Stihl MSA 161 T Manual De Instrucciones

25 Inspection and Maintenance

24.2 Cleaning the Guide Bar and Saw Chain

WARNING
To reduce the risk of personal injury from unintended
activation, remove the battery and engage the chain brake
before carrying out any cleaning work, @ 9. Users of this
chain saw should carry out only the cleaning described in
this manual.To help prevent injuries, always wear heavy-
duty work gloves when handling the chain.
To properly clean the guide bar and chain:
► Remove the guide bar and the chain, @ 16.2.2.
1
► Clean the oil outlet duct (1), oil inlet bore (2) and groove
(3) with a brush, a slightly dampened cloth or resin
solvent, such as STIHL Resin Remover & Lubricant. Do
not use detergents.
► Clean the chain with a brush, a slightly dampened cloth or
resin solvent. Do not use detergents.
► Do not use a pressure washer to clean the guide bar or
chain or otherwise spray them with water or other liquids.
0458-791-8621-C

25.1 Inspecting and Maintaining the Chain Saw

To reduce the risk of personal injury from unintended
activation, remove the battery before inspecting the chain
saw or carrying out any maintenance, @ 10. Carry out only
the maintenance operations described in this manual. There
are no user-authorized repairs. STIHL recommends that
repair work be performed by authorized STIHL servicing
dealers.
3
Proper maintenance of the chain saw includes the following
activities:
► Inspecting the chain sprocket periodically and having a
► Inspecting the guide bar for proper groove depth and
2
3
► Periodically sharpening the chain, maintaining the depth
► Having worn, missing or damaged safety labels replaced
If you make a warranty claim for a component which has not
been serviced or maintained properly, coverage may be
denied.

25.2 Inspecting and Maintaining the Chain Sprocket

► Switch off the chain saw, engage the chain brake and
► Disengage the chain brake, @ 17.2.
► Remove the chain sprocket cover, saw chain and guide
25 Inspection and Maintenance
WARNING
worn chain sprocket replaced by an authorized STIHL
servicing dealer.
spread and replacing the guide bar it if it shows signs of
excessive wear or damage.
limiting guides at the appropriate height and replacing the
saw chain when indicated by the relevant wear marks or
when the chain is damaged or shows signs of excessive
wear.
by an authorized STIHL servicing dealer.
remove the battery.
bar.
English
51