Glowforge Pro Guia Del Usuario página 34

not a surge protector or power strip.
● Turn on your Glowforge by pressing the switch so the "l" side is depressed.
● Lights will come on, the head will move, and you might hear a bubbling
sound. The unit's button will glow teal. Your Glowforge is on!
Sign in and connect your Glowforge to Wi-Fi
W i-Fi network must be 2.4 GHz b/g/n and WPA2, WPA, WEP, or open. ​
Your ​
user must have their own account. If another user needs an account email us at
[email protected]​
you to use your Glowforge online account.
Get Ready
Find a device that uses Wi-Fi to access
The internet, like a laptop computer. Go to
community.glowforge.com​
the page loads correctly.
Begin Setup
To begin setup, go to ​
Sign In
Your username is the email you used when placing
your order. If you have not used your Glowforge
account at all yet, you can set up your password by
clicking "Forgot password?" You'll receive an email
to help you create or reset your password.
Enable Airplane Mode
If you are using a phone or other device that can
access the internet through the cellular network, put
it in airplane mode. Otherwise, it will use the cellular
network, and won't communicate with your Glowforge
in the next step.
Copyright Glowforge, Inc. 2019
to request one. It is a violation of your agreement to allow anyone other than
and make sure
s etup.glowforge.com
N ote that every
34