Glowforge Pro Guia Del Usuario página 28

Remove the back Pro Shield from the inner back wall of your Glowforge
Turn the black finger screws on either end of the Pro Shield counterclockwise to unscrew
them, then lift the shield away from the wall.
Reinstall your crumb tray, close the front door, and turn on your Glowforge!
Instructions for ​ i nstalling your crumb tray​
Your Glowforge Accessory Pack
It's time to open your Glowforge Accessory
Pack. Inside you'll find your jet black ferrous
steel crumb tray, power cord, an exhaust
hose, and two ring clamps.
Glowforge Pro only: For more information about Pro Glasses and Pro Shields, see the
Glowforge Pro Training Materials.
Copyright Glowforge, Inc. 2019
are available.
28