Werner PN125365 Manual De Utilización página 5

4
Markings on the product
Do not remove the safety markings or cover them with
adhesive labels or paint.
Depending on the ladder design, not all of the safety
markings described below will appear on the ladder.
General markings
Falling from the ladder may cause
serious injuries.
Read the instructions in their entirety.
Additional information on the ladder is
available online.
Never use a damaged ladder. Inspect the
ladder for signs of damage upon delivery
and before every use.
The maximum load capacity may not be
exceeded.
Do not use the ladder on an uneven or
unstable surface.
Avoid leaning out of the product's sides.
Only one person may be on the ladder at
any time.
Always face the ladder when climbing or
descending it.
Never use the ladder to bridge a gap.
Do not set up the ladder on a soiled
surface.
The ladder is suitable
for both commercial and
household use.
Ensure you grab onto the ladder securely
when climbing or descending it.
Avoid work that involves exerting a lateral
load on the ladder, e.g. drilling into solid
materials to the side of the ladder.
While using the ladder, do not carry
heavy or bulky equipment.
Wear appropriate shoes while climbing
the ladder.
Do not use the ladder if you have limited
physical ability.
Be aware of your health and physical
condition. Consumption of medications,
alcohol or drugs is detrimental to safety.
Identify all risks posed by electrical
equipment in the working area, e.g. high-
voltage power lines or other exposed
electrical equipment. Do not use the
ladder if there are electrical risks.
Product-specific markings
The ladder must be set up in a correct
position, e.g. the proper ladder angle
(72°).
72º
The rungs of the single ladder have to be
in a horizontal position
When using a single ladder to access
greater heights, ensure that the ladder
extends at least 1m beyond the resting
point and secure the ladder where
necessary.
The ladder may only be used in the
orientation specified.
The ladder may be used to
lean against pole.
EN
5